FORTISSIMO INTEGRATED AMPLIFIER
Product Infomation  
FORTISSIMO INTEGRATED AMPLIFIER
INTEGRATED AMPLIFIER
The Fortissimo Integrated Amplifier is the newcomer in the Audio Analogue ArmoniA line. It shares the line philosophy: maximizing value for money. But not only! The Fortissimo Integrated Amplifier further develops our concept about what an integrated amplifier is. In fact, we believe that the integrated amplifier has to be the interface between the loudspeakers and many different audio systems guaranteeing the best audio performance at all times.
Features:
• Toroidal transformer analogue power supply with 2 separated lines:
1.Power amplifier supply.
2.All Preamp and small signal sections power supply.
• Separated supply section for each power amplifier channel.
• 4-layer board to minimize the track length and avoid interference between
different stages.
• Low noise Solid state Input selector circuits.
• Highest-end quality volume control.
• Low-noise, low-distortion Pre amp stage.
• Automatic thermal tracking power stage.
• Integrated electronic protection designed to work against overloading and overheating with the less interference
on the audio performance.
• Settable Pre/Rec output.
• Phones output.
• Digital SPDIF output giving the selected digital input.
• 16-24 bit Optical digital input accepting a sample frequency as wide as 108KHz. The input can also be set in
ByPass Mode and the gain in bypass mode can be changed in the range of +/-10dB.
• 16-24 bit Coaxial digital input accepting a sample frequency as wide as 108KHz. The input can also be set in
ByPass Mode and the gain in bypass mode can be changed in the range of +/-10dB.
• Low noise low distortion balanced input.
• 16Bit USB connection accepting sample frequency as wide as 48KHz.
• Preamp MM/MC Phono stage with settable gain and input impedance.
• Line input on the front panel.
• 3 Stereo RCA Inputs.
• 1 Stereo RCA input settable into ByPass mode. When the input is set in BY-Pass mode the gain can be changed
in the range of +/-10dB.
• RecUSB output carrying the preamplified audio signal to the PC/MAC.
• Trigger In Input, by which is possible to turn on the unit via a 12VDC trigger signal.
• Highest-end quality passive components.
• Microcontroller based equipment management.
Specification
Parameter
Value
Dimensions (Nota1)
4.6 x 17,5 x 15,4 “
Weight
27,6 Lbs
Overall Signal chain gain
36 dB
Unbalanced Line input impedance
60 KOhm
Balanced Line input impedance
20KOhm (differential input impedance ) 1MOhm (Impedance on each phase )
Phono Input Impedence
MM (47K or 47K//150pF) MC (100R or 50R)
Frequency response (Nota2)
120 KHz
Noise Level (Nota5)
< -110 dBV
SNR (Nota3)
> 100 dB
Output power on 8Ohm load (Nota4)
100W @ 0.015% THD + N
Output Power on 4Ohm load (Nota4)
180W @ 0.3% THD + N
Inputs
4 Unbalanced Inputs + 1 Balanced Input + 1 Frontal Input + 1 Phono MM/MC Input + 1 Optical Input + 1 Coaxial Input + 1 USB Input
Outputs
REC/PRE Output + Phone Output + SPDIF Output + USBREC Output + Trigger IN
 
 
서울시 중랑구 묵2동 245-4 덕산빌딩 (주)태인기기 TEL : 02-971-8241 EMAIL: taein@taein.com
Copyright (C) 2013. TAEIN International Co.,Ltd All Rights Reserved.