• Product Infomation
Contour S R
Rear Speaker
Review
  • Product Detail
The Contour S R was conceived to deliver authentic Dynaudio performance in applications where conventional loudspeakers are not viable.

The S R expands the Contour performance level to the same high level of quality as the other models within the range. Its unique, compact geometry renders it discreet, a real advantage when mounting it onto a wall or integrating it into a living environment. Its narrowly tapered, angular shape renders it stylish as well.

The Contour S R thus is a perfect solution as an elegant high-quality loudspeaker to complement a plasma display monitor, as well as a very high performance surround loudspeaker for any Contour multi-channel system.

The S R, the smallest of the Contour models, features the same high-quality Dynaudio drivers exclusive to this range, ensuring a seamless sonic integration into any system comprised of any model Contour mains and the S C center.
  • Specification
Sensitivity (2.83 V/1 m):
 86 dB
Recommended Amp. Power:
 Small size rooms: >30 watts
Medium size rooms: >80 watts
Large size rooms: -- watts
IEC Long Term Power Handling:
 <100 watts
Impedance, Nominal:
 4 ohms
Impedance, (20-200 Hz):
 3.7 - 12.0 ohms
Impedance, (200-20 kHz):
 3.6 - 7.77 ohms
Impedance, Phase Shift (20-200 Hz):
 -36.3° - +29.4°
Impedance, Phase Shift (200-20 kHz):
 -9.8° - +22.2°
Impedance, HF (200 kHz):
 7.6 ohms
Frequency Response (+/- 3 dB):
 80 Hz - 25 kHz
Resonance Frequency:
 97 Hz
Internal Cabinet Volume:
 2.4 litres
Bass Principle:
 Closed Cabinet
Weight:
 10.6 lbs. (4.8 kg)
Dimensions (W x H x L):
 6.5” x 10.9” x 6.5” (165 x 277 x 166 mm)
Crossover:
 2 way. The crossover is impedance corrected.
Crossover Frequencies: 2300 Hz
Crossover Slope:
 12 dB/oct
Connection:
 Gold plated binding posts (for spades and 4 mm plugs).
Magnetic Shielding (3 gauss) minimum distance from TV: 5.5” (14 cm)
Recommended Placing:
 Wall, shelf, or stand.
Remarks:
 Tweeter:
28 mm soft dome - technology from Esotar Magnetic fluid. Pure aluminium wire voice coil. Woofer: Die-cast chassis. 15 cm one-piece moulded MSP polypropylene cone. 75 mm long throw pure aluminium wire voice coil, wound on aluminium former.
Woofer:
Die-cast chassis. 15 cm one-piece moulded MSP polypropylene cone. 75 mm long throw pure aluminium wire voice coil, wound on Kapton.
Crossover:
Glass fibre PCB with extra copper thickness. Capacitors with low loss dielectricum. Zero compression resistors. Inductors wound on “air cores”.
Cabinet:
16 mm MDF. Metal baffle sandwiched to the cabinet through a damping panel. Available in different veneers, palisander, maple and cherry. Custom finishes upon request. Grille with magnetic lock system included.